MARKER SUPERDUPERTHREAD

[purehatecrew]

yes sir, there bark is much meaner than there bite, there not that wide.

[kaser]

Best mid sized mop in the world.
72671

:D

you kidding bro, i went and snagged me a dozen the other day. returned home all excited, couldnt wait to whip some paint in em then i realised there crap, the paint drips out of them theres no air tight seal so you cant squeeze them when the paints at the bottom to get a fresh juicy nib, you have to tilt them to get the paint running through and then squeeze for sexy drips but by then your hands covered in paint. unless you take out the crappy plastic nip and whack some chalk board marker in there.. but yeah :)

[klog_tmf]

that zig marer is dope

[androidx]

you kidding bro, i went and snagged me a dozen the other day. returned home all excited, couldnt wait to whip some paint in em then i realised there crap, the paint drips out of them theres no air tight seal so you cant squeeze them when the paints at the bottom to get a fresh juicy nib, you have to tilt them to get the paint running through and then squeeze for sexy drips but by then your hands covered in paint. unless you take out the crappy plastic nip and whack some chalk board marker in there.. but yeah :)

You can take the nib out from under the plastic that's around it. Cut a piece of sock and put that around the nib then back into the plastic surrounding to hold in place. Works great. Someone made a picture graph of how to do it a while ago, but it's pretty straight forward from what I just said.

Be more creative, don't give up on shit just cause it doesn't work that great the first time you used it. There's always ways to improve.

[eupho]

Does anybody know the best way to make a magnum mop? I saw a picture of it and it was called a smith. Basically just a magnum filled with your own ink/paint with your own nib. I was told getting the nib out would be hard but..It seems pretty impossible considering the shit is packed in the whole marker. The top part was hard but the rest just seems impossible..
Or are you just suppose to take the top part off? but then wouldnt the insde shit suck up your ink? I don't know, any help is appreciated..
http://i38.photobucket.com/albums/e136/gaylordfocker92/pens3.jpg

bottom row, in the middle.

[Devour!]

i dont think its called smith......smith was the writer who used it

[memfoe]

.:cool: :cool: :D :rolleyes:

[eupho]

i dont think its called smith......smith was the writer who used it

Yeah I was referring to the picture.

[Devour!]

i dont think its a pilot magnum either...pilot magnum is to the left of the pen your talking bout


sorry im not much help..:D

[androidx]

He's not talking about a pilot, it's just a marker called magnum, you can read it on the marker.

[LIV3ONE-CityOfWind]

http://img250.imageshack.us/img250/5900/840a0881le4.jpg

http://img250.imageshack.us/img250/9030/840a0893gw2.jpg

[LIV3ONE-CityOfWind]

http://img229.imageshack.us/img229/2834/840a0896sd1.jpg

[eupho]

Ohh..I see. There's two magnums on there. Mines totally different from the one I waslooking at.Oh well thanks anyways.

[heirkb]

hey purehate, whered you get that white thin mop with the black top?

[purehatecrew]

dollor store,days ago i wish i grabed more

[heirkb]

its squeezy too as i can see from the drips...did you change the nib or did a nib that good come with it? what was it supposed to be (window marker)? ima go check out some dollar stores around me for shit like this cause mad cats get sexy shit at dollar stores...

[purehatecrew]

yea thats a stock nib and it kicks ass, it was for kids like clean finger painting or some shit, it had a kangaro on it, it'll put a drip any where you ask it to.

[androidx]

Just pocketed about 20 last night. :D

They're pretty ill.

[ilove2bomb]

Does anybody know the best way to make a magnum mop? I saw a picture of it and it was called a smith. Basically just a magnum filled with your own ink/paint with your own nib. I was told getting the nib out would be hard but..It seems pretty impossible considering the shit is packed in the whole marker. The top part was hard but the rest just seems impossible..
Or are you just suppose to take the top part off? but then wouldnt the insde shit suck up your ink? I don't know, any help is appreciated..
http://i38.photobucket.com/albums/e136/gaylordfocker92/pens3.jpg

bottom row, in the middle.

what site do you get that picture from?

[Skag]

That picture has been posted on many threads on this site over and over again. Stop it.

And a "Magnum Mop" is fucking easy to make. I do it to Pilots heaps, yank out the nib, use needle nose pliers to take out the felt in the marker, fill with ink and fold a peice of chalkboard eraser and plug the hole. I never make mine too tight, though leaky they provide drips. Dirty markers are ten time the fun of a normal marker.

[purehatecrew]

^^then i must be having alot of fun!!!

[heirkb]

^^^for real, your whole damn hand is covered with that green "oil bar"...damn...i hate gettin streaks or paint on my hands cause that shit is hella hard to get out...that only leaves ink that i dont really mid cause even though it stains, its not hard to take care of in the immediate situation...

[purehatecrew]

i use this stuff called purple somthing,it is for getting oil stains off of drive ways so it brakes down the oils in paint and ink.and it has pumis in it like that gojo shit i used in shop class i would recomend that shit it makes paint and ink was off like it came out of a zig,you can find it in auto parts stores.

[Skag]

What kinda bingo mop is the one full of chrome paint? Is that one of those ones from that samplesitethingzamabob?

[heirkb]

its not a bingo marker...its hella better cause its mad squeezy. its a "envelope moistener" or at least mine is, cept mine has a grey cap from what i remember. you can get it at staples in the packaging isle...

[kickfiend]

Does anybody know the best way to make a magnum mop? I saw a picture of it and it was called a smith. Basically just a magnum filled with your own ink/paint with your own nib. I was told getting the nib out would be hard but..It seems pretty impossible considering the shit is packed in the whole marker. The top part was hard but the rest just seems impossible..
Or are you just suppose to take the top part off? but then wouldnt the insde shit suck up your ink? I don't know, any help is appreciated..
http://i38.photobucket.com/albums/e136/gaylordfocker92/pens3.jpg

bottom row, in the middle.



why does this remind me of jail made shanks?

[heirkb]

^^^hahaha true...
i just made a mop out of the acrylic paint containers at michaels (likr the standard squeezy 3 inch ones) filled with bucket rusto black and thinner and a bingo dabber nib wrapped in electric tape cause it wasnt thick enough. sick drips and all...

[purehatecrew]

yea it is the envolope thing from staples, i love them one of my favorite "out of the box" mops.

[LIV3ONE-CityOfWind]

yea it is the envolope thing from staples, i love them one of my favorite "out of the box" mops.



and they come in 4 packs around here, even better

[heirkb]

6 packs where i live if i remember correctly and theyre mad cheap so rack or pay you got both options...

[Blaise Pascal]

why does this remind me of jail made shanks?


because your That gully.

[JigaboosPigaboos]

I finally understand your name man.
Clever.

[slipone]

whats it mean?

[JigaboosPigaboos]

It has to do with physics type shit figure it out.

[slipone]

fuck u...j/p
ok fine ill go to google and find out what it means.

[sandinthesea]

picked this up at big lots.
nib sucks though.
ima have to go with the ever-so-trusty chalkboard eraser
http://img511.imageshack.us/img511/2930/1028072246zw1.jpg (http://imageshack.us)

[sandinthesea]

^^If you look, its about the size of a regular Bic lighter.

[purehatecrew]

sweet find dude.

[JigaboosPigaboos]

I have some but there horrible.
So impossible to squeeze. they dont flow for shit.

[sandinthesea]

I have some but there horrible.
So impossible to squeeze. they dont flow for shit.
yeah, but i thought i'd cop that shit just to try it.....

[heirkb]

^^^the nib is ill. theres no problem with it if you change the shit inside for some good ink. its a pretty nice lil mop. mine is a bit squeezy now that i put thinner in it. if you want a squeezy version of that, get a sour spray candy thing and put that nib on it...

[rabiater]

Found a ultrasqueezable body lotion container from a hotel. The cap was the type that locks onto a notch on the dispensing tube so i cut the tube just above the notch to make room for the nib. The nib is made of thick felt with a piece of old sock fabric for extra snug fit.

You give it a tiny squeeze to fill the nib with oilbased thinnedout paint, squeeze a bit more for sick drips.

http://www.rabiat.org/squeezer.jpg

I'm sorry for the lousy photo, the plastic bag/tape routine is something i throw on homemades when trying them out in the beginning to reduce the risk of paintfilled pockets.

[rabiater]

(doublepost)

[hydrogenated]

because your That gully.

Legend.end of

[heirkb]

haha i thought i was the only one who did that to mops...

[Skag]

Far from it. And rabiater, that marker of yours is going to dry up quick. paint don't flow through eraser markers.

[rabiater]

It has dried up a bit, but nowhere as bad as eraser felt. This is a softer felt i got from a crafts store. The main reason it's still going strong i think is that the eraser felt is square and a bit undersized compared to the hole - letting the paint flow freely throught the sock around the felt while the felt maintains the shape of the nib.

[rabiater]

It still writes a bit dodgy but i like that you can even hold it upright and a tiny squeeze will fill the nib with paint.

http://www.rabiat.org/hellyeah.jpg

I guess filling it up with ink instead will create either mass mayhem or totally unreadable blobs..

[heirkb]

ima say illegible blobs to the ink idea...thats already hard enough to read...or at least the "yeah" was...

[asdf_va!]

^^oh... that's what it said.
Yeah...

[purehatecrew]

i got one of those mini big lots mop, ima let it sit with some thinner to get it sqeazy,but they also hadsharpi painters 3 packs and wierd pentel markers,

[sandinthesea]

i got one of those mini big lots mop, ima let it sit with some thinner to get it sqeazy,but they also hadsharpi painters 3 packs and wierd pentel markers,
that shit crossed my mind but wasnt sure if it would work or not.


let me know how it turns out.

[purehatecrew]

i lost the fucker,thing is to small for its own good.let me find that shit or go rack(cuz sayign i racked it makes me 20 times more legit) more.

[JigaboosPigaboos]

Do you mean those pentels that have a pump thing on the back?

[purehatecrew]

yea i guess i just gave them a glance, any good

[JigaboosPigaboos]

No there like marks alot ink sort of translucent shitty crap.

[Blaise Pascal]

http://www.lithcoproducts.com/images/china%20markers.jpg

[heirkb]

yea im pretty sure thats what made mine a lil squeezy. those lil things are best for ink though. i have bucket rusto and it drips but not enough for clean non streaky lines...

[Blaise Pascal]

taking it back...

[ohefdubs]

http://www.lithcoproducts.com/images/china%20markers.jpg

old school shit here










www.oozeink.com (http://www.oozeink.com)
www.oozeink.com (http://www.oozeink.com)
www.oozeink.com

[Blaise Pascal]

am i missing something with that ooze site

[Yuki Nagato]

http://www.lithcoproducts.com/images/china%20markers.jpg

these things squeek so much on some surfaces.

fun to mess around with though

[snack5]

Shoe polish with home brew ink in it.
http://i214.photobucket.com/albums/cc212/voiiiiid/mop1.jpg

Bingo dabber filled with ghetto krink.
http://i214.photobucket.com/albums/cc212/voiiiiid/mop2.jpg

More to come soon.

[androidx]

... cool?

[asdf_va!]

Sweet Keyboard cover!

[DEFY_sfodcrew]

am i missing something with that ooze site

nope, just thinned down paint and brake fluid.

[LIV3ONE-CityOfWind]

http://www.lithcoproducts.com/images/china%20markers.jpg

I used to fucks with these when I was a youngin, they suck but they get the job done and look almost like a streak.

[Mr. Dedication777]

So I grabbed a few of these lookalike ded 2 for a dollar!!! and then I saw these window writers in the kids section of a random store my wifey dragged me into, so I was happy.
with these and a few kiwi's I will have good times....
the one with the postal sticker is no big secret, neither is the window squeezers, but the ded's were a cool find for me...... I'm looking for different ways to make nib's I'd like to make one that I could fit onto these lookalike's real good without giving up too much spillage while the tip is pointed down(you konw what I'm saying....
http://img.photobucket.com/albums/v417/griffleer/IMG_1261.jpg

[Devour!]

those ded look alikes are no secret either...theyve been discussed

[asdf_va!]

Yo Mr.D7's...

There is a great tutorial on modding those type
of nibs. No matter want the size. It's like 10 or so
pages back maybe. I forget who did it, but it will
make those nibs last. Nice find.

[beantownbeatz]

#3=http://www.amokcity.org/steeltrainshop/catalog/images/093tagstarxtrawide.jpg


number 3 and 4 i cant find fucking anywhere any help

[heirkb]

Yo Mr.D7's...

There is a great tutorial on modding those type
of nibs. No matter want the size. It's like 10 or so
pages back maybe. I forget who did it, but it will
make those nibs last. Nice find.

haha, thanks asdf...i made that thing...

and you reminded me, MORE UPDATES ON THE GUIDE (find the guide and add these steps):
1. once you got your sock under the plastic lip, take your pinchy metal thang thang that i gave pics of and pull up on the bottom part of the lip. what i mean is, stick the thing under the lip (in between the plastic and the sock) and push/pull the plastic lip up a bit, itll loosen up and cover the sock more. flicks wont show you shit so i wont bother. go around the WHOLE nib doin this.
2. once youve lifted the lip a LIL bit, you dont wanna bend it back, just pull it over the sock, go around the whole thing pinching the lip down again. doing all this will make the lip more steady over the sock nib. the guide on bs had some complicated shit with lighters and bending the lip back, etc. too hard for my lazy ass.

and an edit to the guide:
unless youre puttin ink in the marker, DO NOT KEEP THE FOAM OR LEAK PROTECTOR UNDER THE SOCK! when you do that, NO paint will flow through and the nib will dry up even quicker. it sucks. just pull the foam/leak protector out and use only sock for the nib if you wanna use paint/dont want drips with your ink...

there you go people...

[JigaboosPigaboos]

http://i112.photobucket.com/albums/n175/Bikerfox_2006/foambrushes.jpg

[JakeBaumer44]

so what exactly are those DED lookalikes? did a search cant find it.

[purehatecrew]

stayz clean stamp pad cleaners

[Devour!]

haha, thanks asdf...i made that thing...

and you reminded me, MORE UPDATES ON THE GUIDE (find the guide and add these steps):
1. once you got your sock under the plastic lip, take your pinchy metal thang thang that i gave pics of and pull up on the bottom part of the lip. what i mean is, stick the thing under the lip (in between the plastic and the sock) and push/pull the plastic lip up a bit, itll loosen up and cover the sock more. flicks wont show you shit so i wont bother. go around the WHOLE nib doin this.
2. once youve lifted the lip a LIL bit, you dont wanna bend it back, just pull it over the sock, go around the whole thing pinching the lip down again. doing all this will make the lip more steady over the sock nib. the guide on bs had some complicated shit with lighters and bending the lip back, etc. too hard for my lazy ass.

and an edit to the guide:
unless youre puttin ink in the marker, DO NOT KEEP THE FOAM OR LEAK PROTECTOR UNDER THE SOCK! when you do that, NO paint will flow through and the nib will dry up even quicker. it sucks. just pull the foam/leak protector out and use only sock for the nib if you wanna use paint/dont want drips with your ink...

there you go people...


video guide
:D

[Mr. Dedication777]

actually the name on these bottles was NOT the staz on stuff, but they are the same as these.....
except it squeezes better than the staz on for some reason, maby what was inside previously loosened up the plastic...
plus the staz on is like 2.99 to buy..... these were 2 for a buck!!!!! no racking necessary..
NO NEED TO CATCH A CASE FOR 3 DOLLARS WORTH OF CLEANING SUPPLIES..LOL

also I've used those spongy brush's to make nib's.... they seem like a good idea but they fall apart after using em a handfull of times... I like felt wrapped tightly in a tshirt, the cotton in a sock is too heavy but the shirt is just right.........:D

[androidx]

haha, thanks asdf...i made that thing...

and you reminded me, MORE UPDATES ON THE GUIDE (find the guide and add these steps):
1. once you got your sock under the plastic lip, take your pinchy metal thang thang that i gave pics of and pull up on the bottom part of the lip. what i mean is, stick the thing under the lip (in between the plastic and the sock) and push/pull the plastic lip up a bit, itll loosen up and cover the sock more. flicks wont show you shit so i wont bother. go around the WHOLE nib doin this.
2. once youve lifted the lip a LIL bit, you dont wanna bend it back, just pull it over the sock, go around the whole thing pinching the lip down again. doing all this will make the lip more steady over the sock nib. the guide on bs had some complicated shit with lighters and bending the lip back, etc. too hard for my lazy ass.

and an edit to the guide:
unless youre puttin ink in the marker, DO NOT KEEP THE FOAM OR LEAK PROTECTOR UNDER THE SOCK! when you do that, NO paint will flow through and the nib will dry up even quicker. it sucks. just pull the foam/leak protector out and use only sock for the nib if you wanna use paint/dont want drips with your ink...

there you go people...


The staz on bottles are different. They don't have that metal piece that you can take off. It's just one big piece of plastic, so this wouldn't work. But good props for other mops.

[publius]

http://www.graffitilt.com/accueil/TiltOnKassi!.jpg
Does anyone recognize that pen? Is that a posca?

[slipone]

why yes it is

[heirkb]

what metal piece are you talkin bout android? i dont have a staz on, im curious now...
bout the video guide idea, i would make one cause its not that hard, i just dont have anyone to film me...im such a loner:bawling: :crying: hahaha

[androidx]

From the picture graff that you or someone else made (I don't remember); It showed a removable metal piece around the nib of the mop holding the mop nib in place. That metal piece was taken off and had the sock placed under it and then the metal piece was placed back on the mop to hold the sock on. I thought this was what you were mentioning, and the staz on cleaners do not have this removable piece to take off, so it wouldn't work. But, like you just said, you are using a different mop, and I have seen other mops that have this removable piece. So therefore, it will work, just not on the staz on cleaner mops.

Sorry to be confusing.

[JakeBaumer44]

ok 1 question. Where do u get the staz on cleaners??

[Skag]

You beat up your parents untill they buy you one.

[JakeBaumer44]

haha for real man. Ive been to michaels dozens of times and never seen it. I wasnt looking but i still didnt see it. Where else is it at besides michaels?

[heirkb]

i dont remember exactly where it is at michaels but it should be next to the stamps...
android, my guide is actually for the nibs that dont have that metal thing cause pretty much all of mine have the nibs the staz ons have (if i remember the staz on nibs correctly, ive seen em even though i dont own one). i actually get what youre talkin bout now cause i have one with a plastic thing on the nib thats like the metal thing you described...
i dont feel like lookin on this page to see who mentioned this but i think that i would agree with them that for markers with paint, sock fabric is a bit too thick. maybe go for the t shirt fabric idea...that might be too thin but its worth tryin...

[KINGEDWARD]

Maybe this has been answered before, but I couldn't find the answer. Those new woven-felt tips that come on Grog mops and I've heard some On the run marks, anyone know if their is a more accessible place to get replacements for them. I figured they were from some kind of shoe polish, but can you find them in the states?

[androidx]

i dont remember exactly where it is at michaels but it should be next to the stamps...
android, my guide is actually for the nibs that dont have that metal thing cause pretty much all of mine have the nibs the staz ons have (if i remember the staz on nibs correctly, ive seen em even though i dont own one). i actually get what youre talkin bout now cause i have one with a plastic thing on the nib thats like the metal thing you described...
i dont feel like lookin on this page to see who mentioned this but i think that i would agree with them that for markers with paint, sock fabric is a bit too thick. maybe go for the t shirt fabric idea...that might be too thin but its worth tryin...

It's all good, simple misunderstanding.

[womphead]

man theres only one spot that sells pilot markers or anything worth getting but its like mom and popps art supply so i feel kinda bad rackn there shit...no major corporate places carry the ill shit to rack. so let me get this straight cause i actually learned this when i was like 13 for the deodorant marker just seal the shit with wax get your ink/paint add a lil thinner/rubbing alcohal/brake fluid (whatever your choice is) stuff the sock let it soak and BAM?!!?!?! and on the kiwi shoe polishers is there even a way to pop off the top i thought it was one solid piece of plastic?

[androidx]

I can't understand you about the deoderant mop.

But for the kiwi: Yes, you can pop off the top, take out the regulator, clean out, add whatever you have. If you do your research, you will easily find everything you needed to know. There's probably about 15 different picture models of how to do this.

[KINGEDWARD]

REPOST: no one knows where to get those woven felt/mohair/ whatever they are tips for mops?

[womphead]

I can't understand you about the deoderant mop.

But for the kiwi: Yes, you can pop off the top, take out the regulator, clean out, add whatever you have. If you do your research, you will easily find everything you needed to know. There's probably about 15 different picture models of how to do this.

word thanks mang. but that deodorant mop well this is from what i can remember when i was thirteen my cousin explaining it to me while watchn wild style hahaha. is just pour hot wax at the bottom of it (to prevent leaking) then put whatever i gots in there and rull the sock up and stuff it in there to where theres no leaking and kinda just turn it up side down a few times to let the paint soak into the sock and viola ready to go...? sound right?

[JakeBaumer44]

new glue stick marker i made thought i would share:

http://i35.photobucket.com/albums/d184/janddcards4sale/017.jpg

http://i35.photobucket.com/albums/d184/janddcards4sale/018.jpg

the ink is actually nice just looks shitty cus of the surface
http://i35.photobucket.com/albums/d184/janddcards4sale/016.jpg

[sandinthesea]

^^shit looks messy....is it?

[JakeBaumer44]

pen ink with a chalkboard eraser

[heirkb]

hmm...thats weird that youre gettin drips with a non squeezy marker...waddid you do for that?

[on1]

how do you get the nib to stay in place? do you glue the sides so they stick in place...or do you just put enough of the felt so its tight?

[heirkb]

enough felt so its tight...i actually figured out the answer to my own question. you gotta use a TINY bit less felt than is hella tight so ink can flow through more easily and you can get drips that way...

edit: hahaha i just saw oinks video for ded mops on youtube...the end is definitely worth seein. hella funny how theyre advertisin that theyre 25 cents cheaper than the competition. no diss to oink cause all his shit looks ill and as soon as i get my shit together ill be buyin it. i just thought it was funny to advertise 25 cent savings...

[kickfiend]

more power to him.

[exzo757]

Thats a bad ass deal lol.

[DJSupreeme]

staz on mops dont have any metal in them wtf

i have a whole bunch.. its exactly like a bingo dabber top except there is no lip around the nib, you have to kind of jimmy it up.

[JakeBaumer44]

how do you get the nib to stay in place? do you glue the sides so they stick in place...or do you just put enough of the felt so its tight?

I did glue it. I wouldnt think that squeezing it in works it might fall out. w/e i glued and it worked. idk why there were so many drips its really saturated i guess i didnt squeeze at all u cant.

[garymow]

ok so the staz on and afta spot cleaner have the same body as the doem dirty mops, and i read a few pages back that the afta one has a mohair nib..is this truth or not? i looked on some site about the stazon one and it doesn't look like a mohair maybe im wrong?

and yes normally i would just go check myself but where im at right now doesn't have any micheals or other craft stores around.

[androidx]

They all have different nibs.

[asdf_va!]

Jake:
Next time you make that mop, or any
mop that uses felt stuffed in it, you can
use Self Vulcanizing Tape (http://www.atomictape.com/atomic_tape_fact_sheet.htm).
Think of it like a tape that, once it's wrapped
around part of the body and then part of the
nib, has a chemical reaction when the tape
overlaps itself. When the tape is doubled
over itself it begins to shrink, or tighten,
and bond to itself. It's heat, chemical,
and water resistant. And it's no toxic.

It will hold the nib in place and get rid
of any leaks that might exist between
the nib and rim of the mop. Check it
out. It's not cheap, but it does work.

This tape was discussed about 100 pages
back. Just search "vulcanizing tape."


GARY:
Yes. The DED mops do have a specially
picked Mo-hair nib. Android was right. Most
different mops, that look the same, have
different nibs.
Good luck...

[NayS]

or get hold of some self vulcanizing rubber liquid. a few years back i manage to rack a big tub of the stuff from a garage. just brush/pour/rub that shit over any gaps or holes and it will dry and seal. you can also use it for waterproofing the insides of containers that your gonna use for mops, liquid latex also does this quite well. pick it up from your local sex shops.

[heirkb]

liquid latex? sex shops? im confused now. the hell you want liquid latex for? homemade condoms i guess...or some freaky shit...

[rabiater]

Liquid latex (the sex store kind) is quite weak and takes damage from a lot of chemicals, as opposed to the more industrial varieties that are made to hold up it's primally made for temporary body painting and such.

[heirkb]

^^oh so i was right bout the freaky shit...just get some fukn acrylic paint you horndogs, that shit is cheap and washes off. im sorry that was way off topic...
anyone else notice that after their kiwi is a lil juiced, the nib gets waaaaay waaaay weaker and poofier? my nib is huge now and it looks like itll rip off any second...

[asdf_va!]

Wrap a square of t-shirt fabric around
the nib and rubber band it down... kinda
snug. Makes your nib last forever. I will
post a flick of mine later. The t-shirt
material is cheap, available, and it lets
you mark on rough porous surfaces that
would normally destroy the foam nib.

Good luck...

[heirkb]

damn asdf, you got answers to all this shit...ima def do that. do you know if it works ok with paint after that? i could see the ink flowing but dunno if the shirt will let paint flow as well...oh yea, you still get drips right?

[heirkb]

edit: stupid fuckin internet and double post...

[asdf_va!]

So the mop on the left is ink,
and mop on the right is paint.

http://i71.photobucket.com/albums/i129/iconx804/111707_19341.jpg

With a good paint mix it works great!
Ink excels with this method. Your lines
are way cleaner and bigger this way.
Great drips!

Again, it's just a square of t-shirt material
rubber banded over the nib and neck of the
bottle. Just cut away the extra cloth.

Good luck...

[яέмίx]

asdf could you post whats in your paint mixture in the one on the right? like the percent of each ingredient

[heirkb]

woah asdf are you the mt that does the throws like the one in the slap in my flick? if so, i truly bow down to you (no homo for all the homophobes)...shit, i already had mad respect for you but if thats you ...well, not that you care about my respect over the internet...if you dont wanna say online, dont, you can pm me if you want, or not if you dont...
and thanks a bunch for the pics, ima def do that now...

[Skag]

*High pitched girlish voice, just like heirbk's* Oh my god asdf, I keep your picture by my bed side and kiss it everynight!

[яέмίx]

im pretty sure thats MQ and if that is asdf then +rep.

[heirkb]

thats mq? shit, ive been reading that wrong for maaaaad long then...damn i feel stupid...
hey for all you know, i could be a girl. ive never given away comments that tell people my gender. ive made comments that would make me a lesbian if i were a girl, but you dont know my gender...aight fuck the mystery, im a guy, im pretty sure it was obvious...
and yes, i do have a pic of asdf next to my bed...homo homo homo! now everyone, go and freak out cause youre not comfortable enough with your own sexuality to know for sure that youre straight so you always have to make fun of gay people to be sure that you are...i on the other hand will be sure that im straight and wont worry bout this shit anymore...
back on topic, DO NOT ever get markal valve markers. those things suck NUTS. the kind im talkin bout are the pro line hp markers. suck BALLS!

[asdf_va!]

Wow... That's MQUE from NYC.
Not me, but I do respect the man's ability
to completely destroy any scene that he is in.
He crushed parts of the westcoast just because.

Not a lot of NYC that will do that.
But that's a whole other conversation.

яέмίx: Here is my Recipe for that paint mix...
(http://www.12ozprophet.com/forum/showpost.php?p=5404491&postcount=5670)
It's a link to the ink thread.
Enjoy!

[Skag]

and yes, i do have a pic of asdf next to my bed...homo homo homo! now everyone, go and freak out cause youre not comfortable enough with your own sexuality to know for sure that youre straight so you always have to make fun of gay people to be sure that you are...i on the other hand will be sure that im straight and wont worry bout this shit anymore...

A pic of asdf next to your bed. Screams out straight.

[Skag]

Faggot.

[heirkb]

hahahahaaaaaaaa, ever hearda sarcasm? wikipedia it if not. ill take the title "faggot with a picture of asdf next to his bed" if you take the title "dumbass who can only see things as they are on the surface"...

[DoItHeyDoIt]

#3=http://www.amokcity.org/steeltrainshop/catalog/images/093tagstarxtrawide.jpg


number 3 and 4 i cant find fucking anywhere any help

i used to have one of those....they fucking sucked...the ink ran out so quickly...maybe it's just the fact that i'm not good enough to figure out how to use it with the letters in my tag is why i don't like 'em...

[Skag]

hahahahaaaaaaaa, ever hearda sarcasm? wikipedia it if not. ill take the title "faggot with a picture of asdf next to his bed" if you take the title "dumbass who can only see things as they are on the surface"...

Could it be "Lord dumbass who can only see things as they are on the surface"?
If so, considered it sold.

And on the topic of Tagstars, freeflow markers tend to run out quickly, kinda like a pilot. Try a zig one with a pump.

[+WAR+]

ooooooohhh e-beef

[slipone]

TAke it to the PM people.
anyways...im deffinantly gona mess with kiwi mops more often now.

[asdf_va!]

^^Co-signed.
Take the non-related talk to the PM
or CH.0... if you dare!

HerbKB - No one thinks you're gay.
Except for Skag, but he's an asshole
anyway... Which is why I like that he is
on here all the time. Contrast is good.
I'm an asshole half the time.

Don't take this internerd stuff too seriously.
It's just 1's and 0's. That's it.

[heirkb]

haha i never get seriously pissed over e-beef. i usually avoid getting angry at other writers cause there are enough fake motherfuckers for that. sorry for the off topics though...
bout the kiwi thing, i did it last night and it was straight sex. i could fuck around with the nib as much as i wanted and it was fine. it gave me a line that was bout 1/4 inch thicker, waaaaaay less streaky, and i still got drips...

[asdf_va!]

That's it!
The t-shirt fabric will eventually start
to wear thin and holes will start to happen,
usually in the center of the nib. If this happens
be sure to replace the cloth. Once you have a small
hole in the t-shirt, then the foam nib can get pulled
out and you don't want that to happen.

The foam nib is essential because it gets saturated
with all the ink you need to do 2 maybe 3 big tags.
Lose the foam and you lose the amount of available
ink in your nib. The t-shirt think makes the nibs last
forever! Glad it worked out.

[chicago1]

is griff a marker or just ink?

[thebrownbomber]

chicago - While I've never used it myself (don't know where to get it here), I'm pretty sure Griffin is leather dye, so it is therefore neither a marker or ink. However, It apparently comes with a cool built in applicator that people rock tags with, and the dye can be mixed with ink to increase staining power. You heads that use this stuff correct me if I'm wrong....Anyways, I think there was a whole discussion on it on the last page if you look.

[asdf_va!]

^^You are correct sir.

It's a leather dye. It also happens to
be the dopest, non graffiti, tool for writing
from the moment that you open it.

Go a page or two back for flicks.

[LIV3ONE-CityOfWind]

^^You are correct sir.

It's a leather dye. It also happens to
be the dopest, non graffiti, tool for writing
from the moment that you open it.

Go a page or two back for flicks.

I racked my first bottle of griff from walgreens in 93. I'd just use the dabber or put it in an SG-7. Which gets me back to the SG-7's, I can't find em, I guess there discontiued. The only one I can think of that would even have an idea is asdf. You ever seen em, had one or used one. At least post a pic of one for my memeories. :) ............

[asdf_va!]

^^SG-7's are long gone...
There was a few flicks floating around,
but to be honest, I have never found one.
They ARE discontinued but I know some cats
that have them as collector items only.

Dope marker.

[LIV3ONE-CityOfWind]

^^SG-7's are long gone...
There was a few flicks floating around,
but to be honest, I have never found one.
They ARE discontinued but I know some cats
that have them as collector items only.

Dope marker.


:( :mad: :( :mad: :(

[UrbAn_ArT]

anyone know where to get those staz-on markers

[xHOPEx]

Michaels. You can find everything you could ever need for graff, at Michaels.

[Thirstyman]

i wish i had this fuckin "Michaels" where im from....seems like a god send for dope shit.

[Blaise Pascal]

Necessity is the mother of invention

[asdf_va!]

^^Well said.

[яέмίx]

you guys want to make a sick marker? check out these killas http://www.youtube.com/watch?v=03LukfCc4bc&feature=related

[Robot_Apocolypse]

Micheal's is the graffiti writers playground, and everything is free. So many funky things tou can make from materials from that place.

[JakeBaumer44]

yea michaels is sick. but we all know that.
now for something mayb we dont. this might have been said b4 but i figure it might help.

so i got some ded lookalikes(not staz on's, but very similar) and they didnt flow as well as i had hoped. you cant take out the penis thing like on the shoe polish mops or else the nib stays pused in, so i did something else that worked well to help to get the marker to flow.
I cut a small hole at the top of the penis thingy. the edges of it are still in tact so it still pushed the nib out, but more ink can flow through the nib with this hole.

thought this might help. sorry if it didnt

[asdf_va!]

Happy Thanks a lot day you jerks!
I'm glad there's a bunch of good cats
sporting good attitudes and being productive.

Back to the Mimosa's...

[SiP029]

made it with foot locker sneaker cleaner bottle

[JakeBaumer44]

gangster. i need to make some more home mades like that. how does it write?

[spindext]

Anyone got the same problem as I do? My mop is just a little squeeze bottle capped with chalkboard eraser felt. Whenever I use it though, the felt always goes inside the bottle. If I squeeze too hard, sometimes the felt just shoots off the bottle and ink just gets everywhere. I think I'm using a reasonable amount of felt. Is there something you guys use to keep it in position or something?

[xHOPEx]

made it with foot locker sneaker cleaner bottle

respect, i love footlocker mini mops

[JakeBaumer44]

Anyone got the same problem as I do? My mop is just a little squeeze bottle capped with chalkboard eraser felt. Whenever I use it though, the felt always goes inside the bottle. If I squeeze too hard, sometimes the felt just shoots off the bottle and ink just gets everywhere. I think I'm using a reasonable amount of felt. Is there something you guys use to keep it in position or something?

first of all, did u just think it would stay in place by itself magically?
You have to use something to hold it there unless you are stuffing it REALLY tight.
I usually make mine with crazy glue. Just glue it or make a bigger peice of felt
and stuff that shit in tight.

[spindext]

But doesn't the glue make it really hard and messy to refill ink later?

[thebrownbomber]

Well, you could leave the glue out and continue to get ink on your hand whenever you use your mop....Thats not messy now, is it?

[asdf_va!]

...Whenever I use it though, the felt always goes inside the bottle. If I squeeze too hard, sometimes the felt just shoots off the bottle...

Check it...

This is an older technique also.
Just make a cotter pin for the felt.

Use a paper clip. Just put two small
holes in the neck of the bottle, put
the felt in and force the paper clip
through the hole, the felt, and back
out the other hole. Bend em back and
tape the shit out of it with electrical tape
or the self vulcanizing tape discussed
earlier. That will hold the felt in and
let you squeeze and push the mop.

To really have this work, you have to
have a good amount of the felt inside
the bottle.

Good luck.

[sandinthesea]

^^^wow, i've never thought of that.


cheers

[thebrownbomber]

figures asdf would have the knowledge. Much thanks for hanging out in this thread and giving out advice.....

[Skag]

Yeah. But being messy with markers is really fun!

[Freightaholic]

http://www.dykem.com/Product.cfm?productID=e6053f46-44ec-405f-8b02-fd3c4a5c4d6f
sounds very promissing

[Somoza]

nope. sorry.

[spindext]

Thanks for the advice!

[Blaise Pascal]

http://www.dykem.com/Product.cfm?productID=e6053f46-44ec-405f-8b02-fd3c4a5c4d6f
sounds very promissing


nope just like a valve sharpie


nothing special

[klog_tmf]

sounds decent

[skibZ]

http://i71.photobucket.com/albums/i129/iconx804/111707_19341.jpg




The first proper mops i've sen on this forum. good.

[androidx]

I haven't had that specific marker, but I can say that most the dykem markers I've used before have been on my good side.

Repost from ink thread, didn't realize that marker was posted in both threads.

[DIRTYWHITEBOY]

i used to have one of those....they fucking sucked...the ink ran out so quickly...maybe it's just the fact that i'm not good enough to figure out how to use it with the letters in my tag is why i don't like 'em...

all those markers suck.weak ink..good for refils tho.

[DoItHeyDoIt]

Best mid sized mop in the world.
72671

:D

i had trouble with those when i tried to refill mine...the ink just wasn't flowin' to the nib....

[asdf_va!]

^^Did you keep the stock nib that come in it?

You can replace it and get a much better flow.

[DoItHeyDoIt]

^^Did you keep the stock nib that come in it?

You can replace it and get a much better flow.

yeah that's probably the problem. i was using the stock nib.

[smurfin']

i filled one with home made krink and it ruined that nib. but i dont know where to get different ones

[androidx]

Yeah, that happens when you let your mop sit out too long. Just make another one.

[kaser]

So the mop on the left is ink,
and mop on the right is paint.

http://i71.photobucket.com/albums/i129/iconx804/111707_19341.jpg

With a good paint mix it works great!
Ink excels with this method. Your lines
are way cleaner and bigger this way.
Great drips!

Again, it's just a square of t-shirt material
rubber banded over the nib and neck of the
bottle. Just cut away the extra cloth.

Good luck...

Not as durable as i thought i would be
holes will start to appear where the red valve is, and eventually the elastic bands snap probably from the mineral terps or ure thinner..
caught like 10 tags last night before i had to get rid of the shirt and go stock foamske's

[BlackbookKWC]

hasnt anyone ever seen a fuckin kiwi before? god damn

[Skag]

Don't complain about normal kiwis. Easy to make, takes like five minutes and you can usually catch a good amount of tags if you dont fucking write on anotsmoothsurface. I tend to like good kiwi tags on shop front windows, and the back of payphones.

[heirkb]

^^^i bet. i gotta cop some of those oink mops still...i wanna find some window markers and just get the nibs...

[purehatecrew]

^^^hahahahaha one for almost as much as they are full,that must have ben a long 2 months

i spent 5 minute and found 12 for 10 bucks.
http://www.ssww.com/store/product/sku=AC653/cmc=SRCH/v=YWxpY2UgbWFya2VyIGJvdHRsZQ%3D%3D/p=1/

[JakeBaumer44]

fucking great find. Ive never been able to find sites that sell shit like that. Props man. im definately gonna cop some of those.

i wonder if u put this in an ink, paint, or even etch if it would stain glass a certain color...

http://www.ssww.com/store/product/sku=SG381/cmc=GRDCMBFNS/grp=CMB/sbgrp=FNS/

[purehatecrew]

have fun with shipping it cost more than the markers

[DEFY_sfodcrew]

I got you beat!
12 for $6

http://www.orientaltrading.com/application?namespace=browse&origin=searchMain.jsp&event=link.itemDetails&demandPrefix=12&sku=56/3006&mode=Searching&erec=13&D=bingo&Ntt=bingo&Ntk=all&Dx=mode%252bmatchallpartial&Ntx=mode%252bmatchallpartial&y=0&N=0&x=0&sd=Brilliant+Bingo+Bottles

[androidx]

Yet shipping comes out to like $20

[Thirstyman]

anyone got a link for those double ended bingo markers?

i had a bit of a look but dont have to much time, any help would be appreciated

thanks

[purehatecrew]

yea shipping is a bitch, but if you order enuf from ssww its free shipping.

and i dont know if those nibs are good.

[JakeBaumer44]

actually on the site i ordered from which wasnt the 1st link posted(i searched, yea) it came out to 12.99 for 12 mops. On that last link it comes out to 12.90. whoops. shoulda waited b4 i ordered. haha

[c-walk]

http://www.troutartsupply.com/product-info.php?bottle_marker-pid64.html

http://www.discountschoolsupply.com/Product/ProductDetail.aspx?product=751&es=7824310000W

[androidx]

and i dont know if those nibs are good.


They're not that great compared to oink nibs, but either way, they get the job done, or you could just order some oink nibs. They fit perfectly.

[Optimist]

no noob.
but have you guys seen this thickener shit

http://www.4graffiti.co.uk/shop/images/uploads/Ink_additives.jpg

[Thirstyman]

your not really telling us very much, just looks like a pile of black shit, what is it?

[Optimist]

its some shit that thickens your ink and makes it harder to buff.

but the my question is now.
how much will this fuck up or clog your nib. or even damage the marker?

[c-walk]

if i'm not mistaken its reburnt paper... and it dissolves within your ink

[Thirstyman]

it will only clog you marker if you put to much in your mix, thus making it to thick to flow through, how does it make it harder to buff? you got a link? or even a name?

[OL'DIRTYGeEEZER]

hey do any of you guys know of SHIVA oil marking sticks. My art teacher had a box full and they look like markal's. I just need to know if they're worth going through all that trouble of sneaking in the classroom and taking them.

[c-walk]

free markers are free markers i say go for it... and i dont think the reburt paper makes the ink harder to buff i think its more along the lines of making home made inks more opaque

but if you have any other questions take it to the ink thread where it belongs

[Thirstyman]

anyone know better links for those empty krink lookin mops, all the ones ive tried dont ship overseas/ are to expensive, would be much appreciated if someone could show me

[asdf_va!]

no noob.
but have you guys seen this thickener shit

http://www.4graffiti.co.uk/shop/images/uploads/Ink_additives.jpg

^^Don't come on here with that faggot internerd
NOOB shit. Seriously. It's totally NOT needed here.

It just makes you sound like an internet TOY.

That looks almost green, so it's either GV or PP.
My guess is that it's Potassium Permanganate (http://en.wikipedia.org/wiki/Potassium_permanganate) and...

NO you fucking toy, it will NOT thicken anything up.
It's a raw chemical stainer and will, if you use too
much in an alcohol ink mix, just settle on the bottom
of the container. So shake your markers before using
them with PP.

Don't talk like you know and then diss people on
this thread. Go to some other site and act like you
know about shit.

[asdf_va!]

^^This chemical, as well as the other 2
of the big 3, will not harm or clog your
nib or markers. As long as you are keeping
your bases straight you will be fine. They
will however stain any and everything, including
your nostrils if you don't where a mask when
adding them to a mix. If you get these chemicals
straight up they come as a powder. Very fine and
are statically drawn to everything. So where gloves
that you plan on throwing away.

I know where you can get these, but I have to check
to see if the homie is still selling chems before I drop
names. If you want to know about the other Big 3 stainers...

Check the first page of the INK thread. (http://www.12ozprophet.com/forum/showthread.php?t=85955)
Word Up.

[UrbAn_ArT]

i've been lookin everywhere for ultras since it's been outta production anyone know where i can still get them

[JakeBaumer44]

^^well if that shit stains everything, i would definatley like to know where to get some.
The cheap Mops that look like what Krink comes in are really nice. I ordered some 2 days ago and they are here already. They are just as good as krink or oink nibs. this is a tag with some black GK in one of the mops, barely had to squeeze:

http://i35.photobucket.com/albums/d184/janddcards4sale/001-5.jpg

these r them:

http://i35.photobucket.com/albums/d184/janddcards4sale/002-2.jpg

http://i35.photobucket.com/albums/d184/janddcards4sale/007-3.jpg

http://i35.photobucket.com/albums/d184/janddcards4sale/004-3.jpg

definately worth getting. I paid 13$ for 12 mops.

[asdf_va!]

That's it man.
Nice. Some of those and some
oil based/thinner mix. That's it.

Works like a charm.

[BELTOLEUM]

haha....damn man i can get 12 for about $5.95

[JakeBaumer44]

^^online? cus it was 8 bux, then shipping so 5.95 plus shipping would be sick. idk where to get these in stores.

[Optimist]

check some arts and craft stores like michaels and beverleys

i found montana gold in beverleys for 6.50 a can

[asdf_va!]

^^Please stop posting in the thread.

[Optimist]

please shut the fuck up faggot

[kaser]

..fuck up. it's not your thread.

[androidx]

please shut the fuck up faggot


Seriously, go away.

[яέмίx]

please shut the fuck up faggot

tits or gtfo

[Optimist]

its a marker thread with a marker question. if you fucking fags dont like it. fucking skip it.
fucking dick suckers

[Freightaholic]

I got you beat!
12 for $6

http://www.orientaltrading.com/application?namespace=browse&origin=searchMain.jsp&event=link.itemDetails&demandPrefix=12&sku=56/3006&mode=Searching&erec=13&D=bingo&Ntt=bingo&Ntk=all&Dx=mode%252bmatchallpartial&Ntx=mode%252bmatchallpartial&y=0&N=0&x=0&sd=Brilliant+Bingo+Bottles

i beat you all i got a three pack of even smaller ones for three bucks at ac moore. ill post a flick when i can get a chance

[thebrownbomber]

check some arts and craft stores like michaels and beverleys

i found montana gold in beverleys for 6.50 a can

its a marker thread with a marker question. if you fucking fags dont like it. fucking skip it.
fucking dick suckers


You had a meaningless post about you finding a can of montana. What does that have to do with markers?

[Thirstyman]

still looking for a site that ships the squeezy krink kinda markers internationally, without ordering over the phone? ive been to the links already posted and searched for myself but with no luck.

help would be appreciated

[Optimist]

You had a meaningless post about you finding a can of montana. What does that have to do with markers?

i said check the art stores for the krink like squeez mops. and then i added that i found montana.

[thebrownbomber]

Actually, you said jack shit about checking art stores for krink squeez mops. you DID post a link to an online graff store in the u.k. Which also I see is where you got your magic ink "thickener."But whether you think you said anything about markers or not, I have yet to see you post anything usefull or productive. Your posts are shit go somewhere else with your big head.

[androidx]

lets make a bet guys... I say he's 14 or 15. What you think guys?

Back to marker talk... Fuck it being 30 degrees and having your markers dry up over 2 hours. I don't know how you guys up north can stand it.

[smurfin']

so say im gunna put house paint in a mid sized mop. about how much brake fluid/thinner should i use?

[DEFY_sfodcrew]

1. wrong thread
2. if it's house paint it's probably water based so you thin it with water
3. "brake fluid/thinner"? what the fuck? those are 2 very different things.
4. if it is oil based paint the recepie you need is on the first page of the ink thread.
5. die

[LIV3ONE-CityOfWind]

http://img524.imageshack.us/img524/4863/840a1199mj4.jpg

[asdf_va!]

You can put Red DED Insides in those
and it's super tough. Dig it.

[MoeLarryCurly]

i beat you all i got a three pack of even smaller ones for three bucks at ac moore. ill post a flick when i can get a chance
you're comparing what you got http://images.acmoore.com/ProductImages/340/340261_1.jpg
to these http://image.orientaltrading.com/otcimg/56_3006.jpg
that's like comparing apples and oranges

[_ABC_]

what kind of nib doesnt get eatin the fuck up by etch?

[20rock]

they dont get eatin

[cons_oner]

jake44, yah got the brilliant bingo ones? i support oinkers, but if theres cheaper mops...

[asdf_va!]

what kind of nib doesnt get eatin the fuck up by etch?

It's a general rule not to talk about etch on here.
If you don't have the etch already, when you get it
there will be instructions on how to use it properly.

Go from there.
It's pretty self explanatory.

[acanz]

I found these mini mops today, they have the same size nib and cap as krink/oink mini mops and are smaller then both.

Oink on the left, stazon on the right.
http://i15.tinypic.com/72l0awh.jpg

[acanz]

By the way it holds half as much as oink/krink/stazon but its refillable and 1oz of ink/paint should last atleast a day.

[c-walk]

well thats exciting but you forgot to mention where you found them...

[acanz]

I didnt forget anything, leave your house and explore for once and maybe you'll find them or something even better.

[slipone]

You can put Red DED Insides in those
and it's super tough. Dig it.

Ded inside Job works in pilots? oh yeah its Outdoorsman where you need a mop or a valve marker to make it work.

[asdf_va!]

^^Word Boogie.

[JakeBaumer44]

the mops i got were called: Bingo Bottle Refillable Markers with Tips & Caps - Set of 12

except they didnt come with any labels on them or anything. Just clear mops that work great. Fuck all those stores that try to make it like 3-4 bucks for one empty mop.

[cons_oner]

thanks JAKE, all the info i needed. ordered some right now.woot! now for some paint thinning...

[LickSackCunt]

Looking back roughly I cant find that link to the tape that is water proof and squeezes into its self once applied, anybody have the link?

[thebrownbomber]

It's called self vulcanizing tape, and I'm not sure if there was ever a link posted to some.

[Yuki Nagato]

hey do any of you guys know of SHIVA oil marking sticks. My art teacher had a box full and they look like markal's. I just need to know if they're worth going through all that trouble of sneaking in the classroom and taking them.

They're made by markal actually.
They're decent,
however the only thing is they're hella soft and kinda messy.

But if you can get em for free don't pass it by!

[asdf_va!]

It's called self vulcanizing tape, and I'm not sure if there was ever a link posted to some.

^^I posted it a while back a couple of times.

It's dope stuff.

ATOMIC TAPE. (http://www.atomictape.com/atomic_tape_fact_sheet.htm)

[LickSackCunt]

Thanks dude, I need to run to the hardware store to finish up my modified bingo dabber.

[JakeBaumer44]

By the way, whoever ordered those Krink look alike mops, its hard as fuck to get the nibs on and off. I had to shave mine down with an x-acto knife to make it managable. Its a pain in the ass but its worth it. they work real nice.

[Skag]

Those tight nibs mean it won't leak.

[asdf_va!]

^^Word up.
Beat me to it.

[JakeBaumer44]

They dont even leak after being shaved down. I just leave the very top the way it was without shaving it, the part that meets up with the nib, so it doesnt leak.

[LickSackCunt]

use anything thin and strong to pry one side up than the other and so on, works fine.

[purehatecrew]

found these on craigslist.
http://dallas.craigslist.org/art/497872700.html

any one here heard or seen them? the little one looks like a zig glue pen.

[Skag]

Ones a small kiwi mop, and the other two are zigs.

[StatusOne]

Are the Mr Black markers any good?

[BELTOLEUM]

^^^^^
if it is filled with mr.black then
it is probaly shit at least from what
i heard


found these on craigslist.
http://dallas.craigslist.org/art/497872700.html

any one here heard or seen them? the little one looks like a zig glue pen.

Merk~one
i think that guy used to be on the
sticker thread alot.
if you find out where he is from and it
is the UK it might be who i am talkin
about.

[2-Ez]

I doubt it considering that is the dallas section of craigslist...

[cømmunist]

blah....

http://img514.imageshack.us/img514/2544/thedroorda9.jpg

[Devour!]

yo comm..show some tags you did with the marsh f brush please

[androidx]

Gold/Copper Kiwi... ill.

[skaterat666]

yo comm..show some tags you did with the marsh f brush please

cosigned

[BlackbookKWC]

how do yall feel bout those white pental markers?

[asdf_va!]

I feel like they are the best white
paint pen you will ever use.

And those Marsh Brush Markers look
just like a brush stroke. They are meant
to brush on stencils and marking in general.
Not really the best for styled out letters, but
I say if it writes... Use it.

[spindext]

Does anyone get the problem of sometimes when you fill mops up with thinned paint and then say you leave it out for a while and then the nib gets hardened up because of the paint. Then the next time you use it, it won't write quite the same way? I just use chalkboard eraser for the nib. There's a cap for it, but it doesnt quite work. Any other suggestions besides getting a better cap for it?

[asdf_va!]

Can't use felt/chalk board erasers with
paint. Only ink. Got switch it out for a mop.

Sorry. No way around it.
I suggest kiwis.

Good luck.